In practice, grinding coffee is a simple process. Take a handful of roasted coffee beans, throw them in a grinder hopper, press a button on the coffee grinder, and voila: you now have the coffee grounds to brew a cup of coffee.
This may not seem like rocket science, but the proven truth is that not all coffee grounds are created equal. In fact, the more precisely and consistently you can grind your beans, the better your coffee will taste.
The science goes like this: as hot water is poured onto the coffee grounds, either in a portafilter basket for espresso, a pourover device or batch brewer, the water extracts flavor compounds from the grounds that give the brewed coffee its flavor.
In brewing a cup of coffee, the goal is to achieve even extraction. To do this, the coffee particles in your portafilter or brewing device should be as close to the same size as possible. This is because coffee dissolves in three distinct stages: sour, sweet and bitter, in that order. If a set of ground coffee contains a wide variety of particle sizes, the coffee will extract unevenly, and it will be impossible to brew a coffee that tastes sweet. The coarser particles of the grounds won’t have enough flavor pulled out of them (under-extraction), creating sour flavors. And the finer particles will have too much flavor pulled out of them (over-extraction), creating bitter flavors. These negative flavors will mingle together in the same cup of coffee, creating an unbalanced taste.
United States Barista Champion Sam Spillman chose to grind her coffee with a Mahlkonig EK43 at the 2019 World Barista Championship.
So what’s a barista to do? Well, according to the 2019 U.S. Barista Champion and Urnex Ambassador Sam Spillman, it all starts with having the right coffee grinder.
For her title-winning barista competition season, Sam’s grinder was the Mahlkonig EK43. She chose the EK43 because its precise and consistent grind production translated to tremendous flavor clarity.
“I wanted my flavors to be so clear that I can tell the judges ‘you’re going to taste pineapple, grapefruit and mango’ and they’re actually going to taste those things,” Sam said. “I used the EK43 because I found that it gave a lot more clarity in the flavors.”
In addition to choosing the EK43 for competition, Sam also employed a series of tools to ensure the coffee particles were even in the portafilter to create her sets of espresso-based drinks. She used the Lyn Weber blind shaker to empty the coffee into the portafilter. She then used the ONA Coffee Distributor to distribute the grounds evenly in the portafilter. Sam also used a PUSH tamper to apply a level amount of pressure to press the coffee grounds into an espresso puck.
Achieving consistent particle size is a fundamental element of preparing coffee both on the barista competition stage as well as in a café setting. And in the café, baristas are preparing more than just a few sets of espresso-based drinks to a small group of judges; they must serve a variety of drinks over the course of a full day. It is vital that a coffee grinder has the endurance to perform not just for a full day, but for its entire lifespan.
That’s why when we developed Grindz, our patented grinder cleaning tablets, we teamed up with Mahlkonig to test and evaluate its efficacy. We were interested in testing the long-term endurance of a Mahlkonig coffee grinder with and without cleaning the machine with Grindz.
For the study, we ground 200kg of coffee through a Mahlkonig K30 Espresso Grinder, measuring the size of the coffee particles throughout the study’s duration. The data we received was clear: in the course of grinding the 200kg of coffee, the average particle size of the ground coffee constantly increased.
With regular use, Grindz can ensure a coffee grinder maintains a consistent average particle size within 300kg of coffee used.
At the start of the test, the K30 grinder at the fixed grind setting produced coffee particles measuring 230 microns. But after grinding 40kg of coffee, the median size of the coffee particle measured at 270 microns. And at 100kg, the median particle was 320 microns. That’s nearly 40% larger than the coffee particle size at the beginning of the study.
Conversely, we saw that with regular use of Grindz, the average particle size of the ground coffee did not increase until 300kg of coffee used.
We learned in the study that this increase of particle size is due to the fines that are created in the coffee grinding process. Fine coffee particles become caught in the hard-to-reach nooks and crannies of the burr set. But running Grindz through the grinder clears out the machine of these fines, which minimizes clumping of coffee grounds – as coffee grounds exit the burr set and enter the burr chamber, they become more compacted.
Three-time World Barista Championship finalist and Urnex Ambassador Ben Put said in his experience, running Grindz through a grinder not only removes the fine coffee particles, but also improves the extraction of his coffee.
“If you’re using Grindz, it cleans out all the fines that are stuck to the walls, which gives your grinds more room before they enter the portafilter and they end up being fluffier,” Ben said. “I think this lends itself to more consistent dosing, so you’ll have a more even extraction because you’ll have a more even bed density.”
Monogram Coffee, owned by three-time World Barista Champion finalist Ben Put.
In addition to higher quality drinks, Ben uses Grindz to ease his hectic day-to-day life as a coffee shop operator. Ben is an owner of Monogram Coffee in Calgary, Canada, which recently expanded to three locations. He doesn’t always have time to disassemble his grinders for full-service maintenance and then put them back together. This is a difficult process in itself – it’s quite easy to accidentally change the alignment on the burr set after taking the grinder apart, especially as a new barista. With Grindz, cleaning your grinder doesn’t involve a surgical procedure on your grinder.
Ben also uses Grindz to avoid grinder emergencies. He’s much less likely to get a panicked service call from one of his staff members telling him that the grinder has just gone down.
“Since we have a regular system of people cleaning out the grinders using Grindz, they’re always in way better shape when I eventually get to them,” Ben said. “It gives you a safety net in terms of maintenance on grinders.”
Ben and Sam shared with us a few other tricks for optimizing grind quality and size:
- When dialing in a coffee, Ben suggests starting by adjusting the grind size, not the dosage. This way, baristas will only need to adjust one brewing factor without influencing other ones, like brew recipe.
- Ben also encourages his staff to keep a consistent amount of beans in the grinder hopper throughout the day. This will maintain a consistent level of pressure on the beans that are being ground through the burrs, helping to keep the grind size as even as possible.
- Sam has three grinder guidelines for dialing in: 1) Know the idiosyncrasies of your grinder make and model. 2) Make small adjustments when dialing in your grinder. 3) Clear out a couple of doses of coffee before you pull your next shot at a new grind setting.
- Sam also encourages her trainees to use Grindz in various scenarios. If you’re switching coffees in a grinder, use Grindz to purge the old coffee through. And if you think you’re grinding less consistently than before, or your dosing becomes erratic, run Grindz through the burrs as a machine reset.
A quality coffee grinder is a key piece of equipment in any coffee shop. It’s only right that coffee professionals take care of them with a few simple preventative measures.